Running out of space for your shoes? Here’s a great DIY project that can help you out!

rack

What you’ll need:

Pencil
Tape measure
Power drill
40mm screws
2 x pine planks 1800mm x 18mm x 285mm
Supports 190mm x 275mm x 30mm

 
What to do:

– The size of the shoe rack you make depends on the size of your shoe collection. Before you start to cut, spread your shoes out on the plank and mark
where you want to position the supports

– Once you’ve marked out the number of supports you need, take your handsaw and cut out the supports as many as requiredshoe

– When you’ve marked out where the supports need to go, line them up on your plank and pre-drill 3 holes for your screws. One at the corners of the supports and one in the centre then screw the supports in place
– When the shelves supports are securely in place, screw the two shelves together at the supports. When you’re done you can either stain or paint the rack to suite your wardrobe.

Handy Hint: A successful project is all in the planning, so it’s a good idea to draw up how you want the finished rack to look on paper first.

We hope you have an awesome time creating this project
Found on – www.bunnings.com.au/diy-advice  

bun